Post Offer Free
Changzhou Runlai Imp& Exp Co.,Ltd  

Gold Index: 7006

You are here: home  > Industrial Drying Equipment  > Industrial Drying Equipment Lzg Series Screw Helix Vibrating Drier With High Stirring Speed

Industrial Drying Equipment Lzg Series Screw Helix Vibrating Drier With High Stirring Speed 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: LZG


 
Industrial Drying Equipment Lzg Series Screw Helix Vibrati

 

Industrial Drying Equipment Lzg Series Screw Helix Vibrating Drier With High Stirring Speed

 

Specifications

Stirring speed is very fast,the drying time is short,the drier is especially suitable for drying sticky material..


 

Principle

The material is sent in stirring drier by auger conveyor. Hot air enters into drier and contact with material for first drying. Under the action of stirring and air flow, material moves backward and being raised and broken, carries out heat and mass transfer with hot air. Small granule and wet air will move backward, large granule will stay for a longer time because of high water content. Thus, even the temperature of entered hot air is 300-500°C, material temperature will be not very high. At the rear of stirring drier, material will enter cyclone separator by the force of air flow and board. Supplement hot air will accelerate the rotating speed of material in separator. It could let material stay for a longer time by using direction of air flow, wind speed and secondary air vent. So this machine could drying coarse granule, finished product is discharged by discharger. The exhaust air from separator will be separated from dust through diffusion type separator and discharged by exhaust fan. Whole system is in operation under negative pressure.


 

 

Features

Stirring speed is very fast. Circumferential velocity of outer edge is 5-15 m/s. Material has good contact with hot air, critical moisture content is low, reach 2%-3%, the heat transfer coefficient could reach 1200-4100 KJ/ (h.°C.m³).
The drying time is short, is generally 2-15 min. There is little hold up of material in drier.
Because of the comminution of stirrer, the product after drying is powder and granule, no matter the raw material is block or other shape.
It is especially suitable for drying sticky material.
It could adjust feeding and discharging time by adjust the angle of stirrer.
The machine accelerates the speed of drying after crush raw material
It could select different stirring type and discharging type according to the characteristic of material.

 

 

Features:

data

Drying capacity (kgH2O) energy consume (kg/h)

Drive of fan

Driving power

model

Steam feed 

heat 145

Hot air furnace 

feed heat 280

Fuel smoke 

ventilate 450

kw

kw

FHG-250

250/400 steam

500/120 coal

750/68 diesel oil

30

5.5

FHG-350

350/550 steam

700/170 coal

1000/90 diesel oil

45/55

5.5

FHG-500

500/800 steam

1000/240 coal

1500/145 diesel oil

75

7.5

 

bigPhoto
 Ms. Liu
General Manager
Tel: 86-519-86302618
Fax: 86-519-86303618
Mobile: 86- 137 7510 8023
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Changzhou Runlai Imp& Exp Co.,Ltd [China (Mainland)]


Business Type:Manufacturer
City: Changzhou
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like: